Tamarack Electronic Sheeter

Electronic Sheeter

Specifications:

Maximum web width:	19" (18" sheeted width)
Speed:	up to 500 FPM (depending upon size and job specs)
Products:	integral labels, integral cards, and a variety of other products. Please contact us for evaluation of special projects.
Cut-off range:	Controlled via electronic change size. The following sizes are available: 4", 4 1/2", 5 1/2" 5 5/6" (from 12"), 6", 7", 7 1/3", 8", 210 mm (from 8 1/2), 8 1/2", 11", 11 2/3", 297 mm (from 12"), 12", 14" Note: any size from 5.5" to 14" which is evenly divisible by 1/4" or 1/2" is possible as well.
Stream capacity:	Single infeed - single or double sheeted
Web direction	System optimized for right to left. Controls can be moved for left to right operation.
Voltage:	230 volts, 3 phase(+ 10%).

Additional Features of cutting module:

Quick change cut off blade holders (8)
Vacuum trim removal (6" outlet to customer's waste system)
Vacuum infeed tape system
Pneumatically-actuated shear slitters
Touch screen control
Electronic registration via printed mark on web (for slack web infeed)
E-Stop
2" steel side frame construction
2 edge trim suction tubes (uses same vacuum system as gap removal)
Operator control integral with Tamarack/press integration available upon evaluation of control circuit at additional cost.

Additional features of batching/stacking module:

Rugged construction with 3/4" side frames.
Servo-driven with electronic line shaft to press line for quick set up and plug in protability.
Mobile with retractable wheels and cable connector plugs.
System is unique in that only one fan/creel wheel is used avoiding complex diverting gates.
State of the art motion controller and control package with total control over machine fuctions and setting at touch screen.
Per Evtec, customer delivery stream requirements: customer needs to provide a consistent stream of product that is laying relatively flat and free of static charge. For multiple streams spacing between streams should be at least 1/4".